slim35

™

SYSTEMS AND MAGIC

Slim3, Slim5

email: info@systemsandmagic.com

M A D E I N I T A L Y

S Y S T E M S A N D M A G I C

√

BlackNoise energy distributors line has now seven models DUPLEX, Derive!, Four, Six, Eight and the current slim3 and slim5 that shares with all other BlackNoise products the same building qualities, either in the materials used and in the assembly, finishing and quality control procedures.

Space constrains? Sim3 and Slim5 have the smallest possible foot print but absolutely

no compromise whatsoever!

slim3 and slim5 distributors, infact, differs only for their physical dimensions, they are exactly half as large as the rest of the BlackNoise line, with 3 and 5 multistandard sockets, respectively.

Present too in these power distributors is the integrated protection against voltage spikes, disruptive pulses and surge events from 250V~ and up with an activation delay of less than 25ns.

Protection operates not only between live and neutral, but between neutral/ground and live/ground as well, and is capable of absorbing up to 25.000 (twenty-five thousand) Ampere overall for pulse events that last between 8 and 20μs or 640 Ampere at a time up to 2ms.¹

Both, moreover, are able to serve a maximum load of about 2300W over 230 V~/10 Ampere, delivered by three or five multistandard outlets that accepts either italian style prongs (large and small), Schuko and US (two poles) but available also as full US (three poles). The usual BlackNoise filters can eventually be connected to one or more of these outlets, adding not only an excellent filtering action, but in fact doubling the already well known overvoltage and spike protection.

Internally the outlets are connected differently than the largest majority of similar devices: star mode instead of serial wiring.

In this arrangement, three separate wires are dedicated to each outlet, all joined in groups at their respective spot at the IEC inlet. In this way, even if hosted in the same case, each outlet is virtually indipendent since it’s directly connected to the mains line, reducing to the least the mutual interferences.

The IEC socket placed on the back follows the standard convention about the correspondence between neutral and live pins: the live one also agrees with the “D” letter on the outlet sockets.

Read the BlackNoise

power distributors brochure

in PDF format

English German

If your audio system already follows a distinction between neutral and live, the same one can thus be held after the BlackNoise distributor addition.

The case is fully made of 4mm thick extruded anti-corodal anodized aluminum 4mm thick on all sides, no assembly screws, milled with digitally controlled machines, individually assembled, finished and checked by hand.

Its shielding limits external EMI and RFI fields and minimizes internal ones so to obtain the highest possibile effectiveness.

The internal packing with epossidic resin helps also a lot in obtaining a high level of mechanical inertia resulting effective in absorbing external as much as internal vibrations.

Best performances are in all cases reached using good quality and high cross-section shielded mains cables to connect it both to mains line and to audio gear. Suitable cables are sold separately, see joker, BlackWire plus+, GoldWire, PEARL.

Even though BlackNoise products have been expressely conceived for High-End Audio duties there are several advantages in using them also in other fields. Video, professional Audio and EDP are elective ones.

BlackNoise units can be connected to: DVD players, TV sets, video projectors, multi-channel setups, Personal Computers, monitors, LCD or plasma panels, mixers and any other consumer or pro audio-video item requiring a high protection against pulses, spikes and mains surges.